Design and Validity of STEM Integrated Physics Electronic Teaching Materials to Improve New Literacy of Class XI High School Students

Annisa N, Asrizal Asrizal

Abstract


The 21st century education demands the integration of STEM into learning to improve technology skills, and students' literacy skills can be increased. One of the ways teachers should guide students to face the challenges of the 21st century is by updating the learning resources used. However, in reality schools still use printed teaching materials, have not integrated STEM well, and students' knowledge and literacy are still low. One solution to this problem is to develop STEM-integrated electronic teaching materials (ETMS) to increase new literacy for class XI high school students. This research uses R&D method with the Ploom development model. The research carried out is only limited to the development and prototype stages. The analytical technique used is the use of Aiken's V formula. The results of the first study were in the form of an ETMS design. The results of the second study are valid ETMS with an average value of 0.94. Based on the results of the study, two conclusions can be drawn. First, ETMS contains STEM development activities related to the facts of real world problems, technology and working principles, as well as mathematical concepts of physics. Second, the results of the prototype stage consist of self-evaluation and expert review. ETMS is valid based on five indicators of validity assessment, namely material substance, visual communication display, learning design, software utilization, and STEM assessment. This ETMS can be an alternative learning resource to improve students' new literacy.

Keywords


Electronic Teaching Matherials; New Literacy; STEM

Full Text:

PDF

References


Abed, E. K. (2019). Electronic learning and its benefits in education. Eurasia Journal of Mathematics, Science and Technology Education, 15(3), 1-8. https://doi.org/10.29333/ejmste/102668

Adnan, M., Ayob, A., Tek, O. E., Ibrahim, M. N., Ishak, N., & Sheriff, J. (2016). Memperkasa pembangunan modal insan Malaysia di peringkat kanak-kanak: Kajian kebolehlaksanaan dan kebolehintegrasian pendidikan STEM dalam kurikulum Permata Negara. Geografia-Malaysian Journal of Society and Space, 12(1), 29-36.

Anggraini, C. E., & Nurita, T. (2021). Analisis buku ajar IPA SMP terkait komponen STEM (science, technology, engineering, mathematics) pada materi tekanan. Pensa E-Journal: Pendidikan Sains, 9(3), 282–288.

Aninda, A., Permanasari, A., & Ardianto, D. (2019). Implementasi pembelajaran berbasis proyek pada materi pencemaran lingkungan untuk meningkatkan literasi STEM siswa SMA. Journal of Science Education and Practice, 3(2), 1–16. DOI: 10.33751/jsep.v3i2.1719

Aoun, J. E. (2020). Book review of robot-proof: Higher education in the age of artificial intelligence. Journal of the European Honors Council, 4(1), 1–3. https://doi.org/10.31378/jehc.131

Ardianto, D., Firman, H., Permanasari, A., & Ramalis, T. R. (2019). What is science, technology, engineering, mathematics (STEM) literacy?. Proceedings of the 3rd Asian Education Symposium, 253, 381-384. https://doi.org/10.2991/aes-18.2019.86

Asrizal, A. (2020). Study of assistance development of thematic learning material by integrating new literacy and disaster literacy on science teachers. Pelita Eksakta, 3(2), 120-128. https://doi.org/10.24036/pelitaeksakta/vol3-iss2/117

Asrizal., Yurnetti, & Usman, E. A. (2022). ICT thematic science teaching material with 5E learning cycle model to develop students’ 21st-century skills. Jurnal Pendidikan IPA Indonesia, 11(1), 61–72. https://doi.org/10.15294/jpii.v11i1.33764

Asrizal., Zan, A. M., Mardian, V., & Festiyed. (2022). The impact of static fluid e-module by integrating STEM on learning outcomes of students. Journal of Education Technology, 6(1), 110–118. https://dx.doi.org/10.23887/jet.v6i1.42458

Azwar, S. (2015). Penyusunan Skala Psikologi (2nd ed.). Yogyakarta: Pustaka Belajar.

Baker, W. M., Lusk, E. J., & Neuhauser, K. L. (2012). On the use of cell phones and other electronic devices in the classroom: Evidence from a survey of faculty and students. Journal of Education for Business, 87(5), 275–289. https://doi.org/10.1080/08832323.2011.622814

Depdiknas. (2010). Pengembangan Bahan Ajar Berbasis TIK. Jakarta: Depdiknas

Ellis, J., Wieselmann, J., Sivaraj, R., Roehrig, G., Dare, E., & Ring-Whalen, E. (2020). Toward a productive definition of technology in science and STEM education. Contemporary Issues in Technology and Teacher Education, 20(3), 472–496.

Gülen, S. (2019). The effect of STEM education roles on the solution of daily life problems. Participatory Educational Research, 6(2), 37–50. https://doi.org/10.17275/per.19.11.6.2

Gülen, S., & Yaman, S. (2019). The effect of integration of STEM disciplines into toulmin’s argumentation model on students’ academic achievement, reflective thinking, and psychomotor skills. Journal of Turkish Science Education, 16(2), 216–230. https://doi.org/10.12973/tused.10276a

Hashim, H. (2018). Application of technology in the digital era education. International Journal of Research in Counseling and Education, 2(1), 1-5. https://doi.org/10.24036/002za0002

Jannah, M., Prasojo, L. D., & Jerusalem, M. A. (2020). Elementary school teachers’ perceptions of digital technology based learning in the 21st century: Promoting digital technology as the proponent learning tools. Al Ibtida: Jurnal Pendidikan Guru MI, 7(1), 1-18. https://doi.org/10.24235/al.ibtida.snj.v7i1.6088

Krajcik, J., & Delen, I. (2016). How to support learners in developing usable and lasting knowledge of STEM. International Journal of Education in Mathematics, Science and Technology, 5(1), 21-28. DOI: 10.18404/ijemst.16863

Laar, E. V., Deursen, A. J. A. M. V., Dijk, J. A. G. M. V., & Haan, J. D. (2020). Determinants of 21st-century skills and 21st-century digital skills for workers: A Systematic literature review. SAGE Open, 10(1), 1-14. https://doi.org/10.1177/2158244019900176

Lase, D. (2019). Education and industrial revolution 4.0. Jurnal Handayani, 10(1), 48–62. https://doi.org/10.24114/jh.v10i1.14138

Li, S., & Liu, B. (2018). Joseph E. Aoun: Robot-proof: Higher education in the age of artificial intelligence. Higher Education, 77, 757–759. https://doi.org/10.1007/s10734-018-0289-3

Niam, M. A., & Asikin, M. (2021). Pentingnya aspek STEM dalam bahan ajar terhadap pembelajaran matematika. PRISMA, Prosiding Seminar Nasional Matematika, 4, 329–335.

Nida, R., Salam, A., & Haryandi, S. (2021). Pengembangan bahan ajar elektronik berbasis multimodel pada materi alat-alat optik untuk melatihkan kemampuan analisis peserta didik. Jurnal Ilmiah Pendidikan Fisika, 5(2), 107-122. https://doi.org/10.20527/jipf.v5i2.2871

Nugroho, O. F., & Nurcahyo, M. A. (2018). Analisis literasi pendidikan STEM pada siswa dan pemahaman konsep IPA melalui peta konsep di SDN Palasari II. Thabiea : Journal of Natural Science Teaching, 1(2), 121–124. DOI:10.21043/thabiea.v1i2.4395

Nurhasnah, N., Kasmita, W., Aswirna, P., & Abshary, F. I. (2020). Developing physics e-module using “construct 2” to support students’ independent learning skills. Thabiea : Journal of Natural Science Teaching, 3(2), 79-94. https://doi.org/10.21043/thabiea.v3i2.8048

Phungsuk, R., Viriyavejakul, C., & Ratanaolarn, T. (2017). Development of a problem-based learning model via a virtual learning environment. Kasetsart Journal of Social Sciences, 38(3), 297–306. https://doi.org/10.1016/j.kjss.2017.01.001

Plomp, T. (2013). Educational design research part A: An introduction. Netherlands: Netherlands Institute for Curriculum Development (SLO).

Pratiwi, M. A., & Jasril, I. R. (2020). Pengaruh penggunaan macromedia flash 8.0 terhadap hasil belajar dasar listrik dan elektronika. Voteteknika (Vocational Teknik Elektronika Dan Informatika), 7(4), 122-130. https://doi.org/10.24036/voteteknika.v7i4.106501

Prayudi, R. A., Hakiki, A. K., Putra, N. R. D., Anzka, T. O., & Ihsan, M. T. (2021). The use of technology in english teaching & learning process. Jurnal Riset Dan Inovasi Pembelajaran, 1(2), 102–111. https://doi.org/10.51574/jrip.v1i2.38

Reaves, J. (2019). 21St-Century skills and the fourth industrial revolution: A critical future role for online education. International Journal on Innovations in Online Education, 3(1), 1-21. https://doi.org/10.1615/intjinnovonlineedu.2019029705

Ring-Whalen, E., Dare, E., Roehrig, G., Titu, P., & Crotty, E. (2018). From conception to curricula: The role of science, technology, engineering, and mathematics in integrated STEM units. International Journal of Education in Mathematics, Science and Technology, 6(4), 343–362. https://doi.org/10.18404/ijemst440338

Rusnilawati., & Gustiana, E. (2017). Pengembangan bahan ajar elektronik (BAE) berbantuan flipbook berbasis keterampilan pemecahan masalah dengan pendekatan CTL pada pembelajaran matematika kelas V Sekolah Dasar. Profesi Pendidikan Dasar, 4(2), 190–201. https://doi.org/10.23917/ppd.v4i2.5450

Said, M. A., Arsyad, M., & Nurlina. (2015). Penerapan model pembelajaran kooperatif tipe scramble dalam meningkatkan hasil belajar siswa kelas X SMA Negeri 14 Makassar. Jurnal Pendidikan Fisika, 3(2), 83-90. https://doi.org/10.26618/jpf.v3i2.255

Saputra, H. J., & Musafanah, Q. (2017). Pengembangan media koran materi IPA di Sekolah Dasar melalui flipbook maker. Prosiding Seminar Nasional Hasil Penelitian VII, 623-631.

Serevina, V., Sunaryo., Raihanati., Astra, I. M., Sari, I. J. (2018). Development of e-module based on problem based learning (PBL) on heat and temperature to improve student’s science process skill. TOJET: The Turkish Online Journal of Educational Technology, 17(3), 26–36.

Sriwahyuni, I., Risdianto, E., & Johan, H. (2019). Pengembangan bahan ajar elektronik menggunakan flip PDF professional pada materi alat-alat optik di SMA. Jurnal Kumparan Fisika, 2(3), 145–152. https://doi.org/10.33369/jkf.2.3.145-152

Sudarsono, S., Abdurrahman, A., & Rosidin, U. (2020). Pengembangan cerita bergambar fisika berbasis STEM untuk menumbuhkan literasi sains pada siswa SMP. Jurnal Pendidikan Fisika, 8(1), 11-23. https://doi.org/10.24127/jpf.v8i1.2202

Suwarma, I. R., Astuti, P., & Endah, E. N. (2015). “Balloon powered car” Sebagai media pembelajaran IPA berbasis STEM (Science, Technology, Engineering, and Mathematics). Prosiding Simposium Nasional Inovasi Dan Pembelajaran Sains, 373–376.

Tharmar, K., & Kalidasan, R. (2019). Impact of self study with and without e-learning modules among physical education students. The International Journal of Analytical and Experimental Modal Analysis, XI(XI), 936-945.

Usmeldi. (2017). Efektivitas penerapan media pembelajaran interaktif dengan software autorun untuk meningkatkan kompetensi fisika siswa SMK Negeri 1 Padang. Jurnal Eksakta Pendidikan (JEP), 1(1), 79-85. https://doi.org/10.24036/jep/vol1-iss1/38

Winarni, J., Zubaidah, S., & Koes, S. (2016). STEM : Apa, Mengapa, dan Bagaimana. Prosiding Semnas Pend. IPA Pascasarjana UM, 1, 976-984.

Yildirim, B., & Selvi, M. (2015). Adaptation of STEM attitude scale to Turkish. Internasional Periodical for the Languange, Literature and History of Turkish or Turkic, 10(3), 1117-1130. https://doi.org/10.7827/turkishstudies.7974

Yulaika, N. F., Harti, H., & Sakti, N. C. (2020). Pengembangan bahan ajar elektronik berbasis flip book untuk meningkatkan hasil belajar peserta didik. JPEKA: Jurnal Pendidikan Ekonomi, Manajemen dan Keuangan, 4(1), 67-76. https://doi.org/10.26740/jpeka.v4n1.p67-76

Yunita, R. A., & Hamdi. (2019). Analisis kemandirian belajar siswa sebagai dasar pengembangan buku elektronik (e-book) fisika terintegrasi edupark. Jurnal Penelitian Pembelajaran Fisika, 5(2), 172-179. https://doi.org/10.24036/jppf.v5i2.107441




DOI: https://doi.org/10.26618/jpf.v10i3.7900

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Jurnal Pendidikan Fisika

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

View JPF Stats

   Free counters!

Jurnal Pendidikan Fisika  is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.